Getting Started
Turning On/Off:
Press the top button down hard and hold for 3-5 seconds. It will vibrate for one second when turned on.
Standard toy levels

Charging
Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 1.5 hours to fully charge.

The indicator light will stay on while charging. Once it is fully charged the solid red light will turn off. If you're unsure whether it's fully charged, you can view the battery indicator in the app.
Note:
DO NOT use the toy while charging.
Cleaning & Care
· Clean your device before and after each use.
· Clean with warm water and mild soap (or a sex toy cleaner).
· You can rinse Domi. DO NOT allow water to drip inside the charging port.
· Dry thoroughly before storing.
· Keep away from extreme heat or cold.
· Make sure your toy is recharged at least once every six months.
Lubricant
Use lube at your own discretion. Only use water-based lube, as silicone or oil based lube may affect the silicone casing.

App Download
Compatible with:
·iPhone/iPad Air/iPad Mini/iPod Touch iOS 9.0 and later
·Android 4.3 and later (with Bluetooth 4.0 enabled)
·Mac (with Bluetooth 4.0 enabled)
·Windows PC (needs a Lovense USB Bluetooth Adapter to connect )

Pairing with Your Devices
Pair with iOS/Android/Mac
1. Press and hold Domi's button to turn on the toy. A light will flash to indicate it's on and ready to pair.
2. Click the icon.
3. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your device.



Note:
· You only have to pair your toy once. Next time it should automatically connect to your smartphone.
· This icon shows the signal of the connection. It will switch to this one
if it disconnects. If paired, it will automatically reconnect.
Pair with PC
1. Press and hold Domi's button to turn on the toy. A light will flash to indicate it's on.
2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.
3. Click the icon.
4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC.



How to program
- 1. After successfully pairing Domi to your phone, tap on the Domi panel in the My Toys section.
- 2. Tap "Program" button to see the programming options.
- 3. Tap "Adjust Levels" to adjust the first three levels.
- 4. Tap "Create New Pattern" to add a preset pattern onto Domi.
